Towing
Amber Valley is a specialist manufacturer of vehicle safety equipment
AVJB01
TRAILER JUNCTION BOX
This is a simple version where the seven core cable is connected to the main plug, the blue lead is not used and a six-way superseal is fitted. The two output circuits are four-way superseal to go to the stop tail and indicator circuits on each side of the trailer. This can be provided as a complete kit if necessary.
AVJB01KIT
COMPLETE WIRING SYSTEM PLUG & PLAY SOLUTION
- Fully tested
- Fully waterproof
- Easy fit, no electrical experience required
- Using industry standard super-seal connectors which are over moulded for added protection
Kit comprises of:
- 1 x Pair LED stop tail & indicator lights, complete with 4 metres of 4 core cable
- 1 x 7.5 metres of core cable with 7 pin 12V plug fitted to one end and 6 way super-seal plug to the other
- 1 x Fully waterproof and potted electrical control unit (ECU)
- 1 x Mounting box for ECU and 12 cable ties
AVJB02
TRAILER JUNCTION BOX
This is the complete system which has an additional input circuit that can come directly from a switch on the towing vehicle. There are two sets of four-way connectors one can be used for front lights/indicators if fitted or alternatively both can be used if two sets of lights are fitted to a trailer.
There are four two-way female superseal connectors, two of which are powered from the tail circuit in the four-way connector allowing the connection of marker lights. The other two are powered directly from the two-way male superseal connector. This is powered via the blue wire in the seven-core cable (PIN 2) and is usually used for accessories that can be switched on by the towing vehicle, ie. work lamps or warning beacons, when powered it sends power to both female connectors. This is also available as a complete system.
AVJB02KIT
EQUIPMENT WIRING SYSTEM COMPLETELY ENCAPSULATED
Kit comprises of:
- 1 x Pair LED stop tail & indicator lights, complete with super-seal connectors
- 1 x 10 metre 7 core cable with 7 pin plug on one end and 1 x 6 way, 1 x 2 way super-seal connectors on the
other end - 1 x Fully waterproof ECU complete with bangs for unused connectors
There are spare connectors for front lights, side marker lights and accessory lights, beacons , work lands etc.
