Timer Switches & Modules

Amber Valley is a specialist manufacturer of vehicle safety equipment

AVG-STSW 12-24V

TIMER SWITCH

This is a range of timer switches ideally suited to trailer applications where the lights or appliance only needs to be switched on for a specific period of time.

Built in warnings are available i.e. the 30 minute timer switch will flash the lights at 28 mins to alert the operator.

AVG10STSW12V – 10 second, 12V, Timer Switch
AVG30STSW12V – 30 second, 12V, Timer Switch
AVG6MTSW12V – 6 Minute, 12V, Timer Switch
AVG30MTSW12V – 30 Minute, 12V, Timer Switch
AVG10STSW24V – 10 second, 24V, Timer Switch
AVG30STSW24V – 30 second, 24V, Timer Switch
AVG6MTSW24V – 6 Minute, 24V, Timer Switch
AVG30MTSW24V – 30 Minute, 24V, Timer Switch

AVTPS24 24V

TIMER SWITCH

This device is a switch with built in 2-hour timer and voltage dropper, with an LED to show it is in operation.

Designed for ticket machines on buses it converts 24V to 5.4V for 2hrs to operate ticket machines.

AVGW27 12-24V

TIMER SWITCH

AVGW27833 – 12-24V 2 Way IP 10A Switch

AVGW27835 – 12-24V Momentary Switch

AVGW27843 – 12-24V 3 Pin Socket

AVBTS01 12-24V

AVBTS02 12-24V

AVBTS03 12-24V

STAINLESS STEEL TIMER SWITCH

Amber Valley are delighted to announce the launch of their new range of dual-voltage multi-setting stainless steel timer switches.

Specifically designed for the food delivery fleets, these timer switches have been hailed as a great improvement by many refrigerated body builders.

The timer circuit can be overridden by pressing the LED switch to avoid wasting power.

AVBTS03 – Slave switch for vehicles with more than one door. The timer circuit is controlled by the master switch.

AVRRS6 12-24V

TIMER CUT-OUT - 6 MINUTE

Six minute timer cut-out
Auto reset
12-24V
IP67 rated – sealed against mud, water and vibration
30(H) x 88(W) x 47(D)
Can be used with any alarm

AVRR2ECU 12-24V

SELECT REVERSE TWICE ECU

Reverse alarm cut-out switch – select reverse twice to disengage the alarm
Auto reset
12-24V
IP67 rated – sealed against mud, water and vibration
30(H) x 88(W) x 47(D)
Can be used with any alarm

AVRRS7 12-24V

TIMER CUT-OUT REVERSE TWICE

In-line timer – allows reverse alarm to sound for first ten seconds of reversing manoeuvre
Auto reset
12-24V
IP67 rated – sealed against mud, water and vibration
30(H) x 88(W) x 47(D)
Can be used with any alarm

EPS1 12-24V

EPS INTERFACE MODULE

Will power up to 3 talking alarms from buzzer output on PDS kit when sensors detect an obstacle.

Dual voltage
Potted to withstand vibration
Solid state electronics
Fully waterproof
Universal – fits all known applications
Compact – easily fits under dashboard.

AVSPLIM01 12-24V

AVSPLIM02 12-24V

SPEED SENSING MODULE

The AVSPLIM01 Speed Sensing Module is designed to turn OFF certain pieces of electronic equipment, whereas the AVSPLIM02 Speed Sensing Module is designed to turn ON certain pieces of electronic equipment above given speeds to eliminate confusion to the vehicle operator and nuisance to the general public.

Ideally suited to front or side sensor systems, the unit will disengage sensor systems when the vehicle is travelling over a certain speed. It has been specifically designed for use with our range of Indicator Alarms and Indicator Alarmalights®. The unit is completely versatile and can be used for any electronic device where working at or below certain speeds is an issue. The unit is completely encapsulated so it can be fitted inside the cab or outside and has a handy mounting bracket for ease of fitting.